Scale and corrosion inhibitor for Boiler BimubPro 400

Characteristics and uses

Effectively control deposition and improve the reliability of the system.

Effective protection of high hardness water supply system.

Advanced polymer/phosphate control formulation.

Suitable for high hardness feed water system boiler, not limited by boiler pressure.

Product Indicators

Appearance                                               colorless to yellow liquid

PH value                                                    7.0-10.0

Density (21 C)/(g/cm3)                           1.15-1.25

Method of Use

This product is added to the boiler drum by a separate dosing tube, which can be diluted or directly added to the water system. The diluted water must be supplied by high quality condensate water, softened water or degassed boiler water.The dosage of Scale and corrosion inhibitor for Boiler DhbsPro 400 depends on the operating pressure of the boiler system, the efficiency of the heat exchanger, the quality of the feed water and the type of fuel.Our technical staff will provide you with detailed dosing plan and guidance.

Packaging and Storage

It can be packed in 25kg plastic drum or according to customer’s requirement. Store and transport away from fire and heat sources, avoid sunshine, prevent water inflow and collision, store in a cool and ventilated place.

Safety and Protection

When operating, pay attention to labor protection, avoid contact with skin, eyes and so on. After contact, rinse with plenty of water immediately and seek medical treatment immediately.