MSF ANTISCALANT&ANTIFOULANT BIM SD2030
BIM SD2030 is a polycarboxylic acid liquid solution used to control the formation and deposition of inorganic salt scale and the fouling deposition of particulate matter in the process of seawater thermal desalination equipment.
BIM SD2030 has the following advantages:
The dosage is low.
Help to reduce equipment cleaning frequency.
The deposition of calcium sulfate can be effectively controlled when the operation parameters of the equipment drift and the water quality condition enters the supersaturated zone of calcium sulfate.
It has better control effect on fouling deposition of demister.
Chemical compatibility and thermal stability
BIM SD2030 is not affected by chlorine or other oxidative fungicides under normal conditions. Thermal stability is achieved by thermogravimetric analysis and differential scanning calorimetry at temperatures below 200 degrees Celsius.
Material compatibility: SS/PE/PVC/MS/PP/Teflon
Physicochemical parameters
Appearance Clear amber liquid
Undiluted pH (20℃) 8.0-8.6
Specific gravity (20℃) 1.25-1.30
Solidification interval 0 to -5℃
Suggestions on dosage
BIM SD2030 can dissolve with water in any proportion. It should be continuously and proportionally added according to the supplementary water flow of seawater, and maintained at the recommended level.
Proposed salt water temperature for BIM SD2030 dosage（MSF）
Packing
25KG plastic barrel or IBC
Operational considerations
BIM SD2030 meets ANSI/NSF standard 60 and can be used for desalination of seawater to produce drinking water.
Please read the label and MSDS carefully before operating the product.